Hydraulic Rotary Actuator for Material Handling Arms
Release time:
2026-11-20 10:10
Source:
The Hydraulic Rotary Actuator we make at ZHONGYI is a compact rotary drive for machines that need a controlled swing at a joint. The Z10 Series on this page is the starting size in our range, and the page describes the series as small in size, convenient to install and high in precision, with wide use in mechanical arms and special robot joints. We build the series for material handling equipment, where a clean rotary motion is often the difference between a simple lift and a machine that can place a load accurately.
What the Z10 Series Is
A hydraulic rotary actuator turns hydraulic pressure into a limited rotation. Unlike a hydraulic motor that keeps spinning, an actuator moves through a set arc and holds position at the end. That behaviour suits a joint that has to swing to an angle and stop, such as the wrist of a manipulator, a rotating grab or a positioning table. The Z10 Series is the smallest family in our actuator range, and the page lists it under material handling. Our wider range continues through the Z20, Z30, Z40, Z50 and Z60 series, so a project can stay with one supplier as the load grows.
Torque and Load Ratings
The specification table gives more than one figure for each size. It lists drive torque, holding torque, moment capacity for a cantilever mount, radial capacity and axial capacity, with both imperial and metric values at the stated pressure. That set matters because a joint can fail in more than one way. Drive torque tells you what the actuator can turn. Holding torque tells you what it can resist when the load tries to move it. The moment, radial and axial figures tell you what the bearing and the housing can carry without damage. A buyer should match all of them to the load case, not just the turning force.
Mounting and Integration
The page describes the series as small in size and convenient to install. A compact body helps when the joint sits at the end of an arm and every kilogram counts. The actuator can be built into a mechanical arm, a special robot joint or a handling attachment, and the hydraulic circuit supplies the pressure and the control valve. Before fixing the mounting, check the bolt pattern, the shaft connection, the hose routing and the access for service. The page gives the capacity figures, and the machine designer should confirm the frame stiffness around the mounting, because a flexible bracket can waste the precision of the actuator.

Where It Is Used
The page names mechanical arms and special robot joints as the main applications, and it places the product under material handling. In a handling machine, a rotary actuator can tilt a grab, turn a clamp, swing a boom or index a fixture. The same function appears in special-purpose robots, where a standard motor and gearbox may be too bulky for the joint. Our range also includes a tilting quick coupler for excavators, which uses the same idea of a controlled tilt at the end of a machine. If your application is outside these examples, send us the motion, the load and the cycle, and we can say whether the Z10 Series fits.
Choosing a Size
Start with the torque the joint needs at the working pressure, then add a margin for shock and for friction in the linkage. Check the holding torque against the load when the machine stops on a slope or holds a raised arm. Then check the moment, radial and axial capacity against the weight and the offset of the attachment. The page gives the figures for each size, so the selection can be made from the table rather than from a guess. If the load is close to a limit, move up one size or ask us to review the case with you.
Working With ZHONGYI
ZHONGYI is a hydraulic rotary actuator manufacturer, and the page presents the company as a professional maker of this product. Our range covers several series plus the tilting quick coupler, and we publish the capacity table so a designer can compare sizes. For a quotation, send the required torque, the rotation angle, the pressure, the load and the mounting sketch. Our email is liujiayu@whsantech.com and our phone is +86-13021635298. We can then confirm the series, the size and the interface.