What are the operation and maintenance points of hydraulic motor
Release time：
2022-11-09 13:45
Source：
At present, hydraulic motors can be used in important fields such as injection molding machinery, construction machinery and metallurgical machinery. In addition, good service hydraulic motor transmission is accurate and reliable, easy to operate and the mechanism is intuitive and easy to grasp and the hydraulic motor load changes have little impact. However, the hydraulic motor in the long-term operation of the process requires good maintenance to ensure its operation, so the following on the operation of the hydraulic motor maintenance points to briefly explain.
One: pay attention to the load situation of the equipment
The operator should avoid the hydraulic motor system has a load of sudden start or stop the brake, so as to avoid causing pressure spikes, pressure relief valve can not respond too quickly to protect the motor from damage, hydraulic motor speed and pressure can not exceed the specified value. In addition, the operator should need to use a good performance of the lubricant, and the lubricant type should be applied to the quality of good service hydraulic motor system.
The second: check the oil tank condition
It is worth mentioning that the operator should pay attention to the detection of powerful hydraulic motor oil tank oil volume to detect whether there is a leak inside the equipment. In addition, the good performance of the hydraulic motor is required to keep as clean as possible to prevent high efficiency hydraulic motor internal existence of solid particles particles and pollutants, etc., and ensure the quality of the hydraulic motor oil.
Three: pay attention to the existence of fault factors
Operators operating hydraulic motor during the time to pay attention to capture the fault signal and to be able to take timely measures. Such as sound, vibration and heat of the small changes; when the hydraulic motor temperature changes; motor whether there is internal leakage, and, leakage point will increase with the temperature, and hydraulic motor internal leakage can make the gasket and liner deformation, may also cause external leakage.
In a word, the operator should pay attention to the favored hydraulic motor for daily inspection, such as the operating conditions of the equipment, working medium, operating sound and motor temperature rise and other content of the inspection. Not only that, the operator should pay attention to disassemble and check whether the hydraulic motor parts are damaged, bite, cracks and wear and so on.
Previous page
Other developments
Precautions in the installation of hydraulic oscillating motor
Hydraulic oscillating motor as one of the hydraulic system implementation components, in actual use is particularly important. But in the installation process should pay attention to what matters?
What are the characteristics of the hydraulic oscillating motor and what is it suitable for?
Hydraulic oscillating motor is a kind of hydraulic actuator with reciprocating output shaft, also called oscillating hydraulic cylinder, which has the advantages of compact structure, safety and reliability, small occupation space, easy design, large output torque and oscillating angle. So what are the characteristics of the hydraulic oscillating motor and what is it suitable for?
Details of Hydraulic Rotary Actuator
The spiral rod of the output shaft is fixed to the cylinder body, and the spiral teeth on the inner surface of the piston mesh with the spiral teeth of the spiral rod, and the surface shape of the spiral rod of the output shaft is the same as that of the outer surface of the piston.
Hydraulic Rotary Actuator Application Industries
Agriculture Construction Energy Marine And many others .. Material handing Military Mining Truck/Trailer
The company owns five series of products, including 10,20, 30, 40 ,50,60, with thirty categories and two hundred of sub-categories.
CONTACT US
Contact: Liu Jiayu
Address: No. 186-2, Hexing Road, Yangting Town, Huancui District, Weihai City, Shandong Province